Twinhan Mantis Ci

[Tobi7185]

DVBViewer pro hab ich jetzt, aber bringt logischerweise auch keine verbesserung des problems. Ist aber trotzdem ein klasse programm. RIESEN unterschied zum mitgelieferten käse...

 

den invacom lnb hab ich jetzt auch bei reichelt bestellt!

[Tobi7185]

Hallo!

Heute kam schon der Invacom LNB. Hab ihn auch direkt montiert! UND:

 

ES KLAPPT!!!!!!!!!!

 

die karte findet jetzt alle sender, egal welcher receiver an ist.

und die singanlqualität ist insgesamt auch besser geworden!

 

Alles in allem: Eine lohnende Investition!

 

 

Danke an alle für die Tips!

Edited September 14, 2006 by Tobi7185

[Marsch1]

Hello,

 

My DVBViewer doesn't "talk" on the right way too the CI Twinhan Mantis 2033

everything seems to be regonised;

the receiver ;

The Alphacrypt ;

the smartcard with number

no double accupied IRQ's

and yet there is no descrambling

 

for 1 week i happily used the Mantis card and so i know it must work.

for an unknown reason now I only see the "free" channels.

In the Netherlands you have some free test channels and the rest are scrambled too descramble with your smartcard and hardware. After 5 clean installation; newest BDA drivers; MCE CI tool; drivers from twinhan;digital rising.net and reading the threads, i'm really running out of options.

 

Can please someone, and offcause the programmer, give usefull info

The supportfile en other output are enclosed

 

Best regards

Marsch

support.zip

[Engelbert]

@ Marsch1

 

Use the tool TransEdit ... with his instructions (member area).

 

Senderscans can be made in a convenient way and sorted at own discretion with that.

One also can if necessary help the transponder files on the jumps.

 

Use for Audio- + AC3Codec:

http://www.free-codecs.com/download/AC3_Filter.htm

[Marsch1]

 

thnxs for the quick respons, i've used transedit before for finding my channels which was never a problem.

Unfortunately rescanning and updating does not help. The preview doesn't work either, only just for the " free" channels.

 

I can't find your modification in transedit to help with the " jump" for descrambling. the box to switch " encrypted" doesn't do anything. I've read the manual/

 

I'm looking forward to more usefull tips.

 

bye

Marsch

[Engelbert]

TransEdit cannot represent scrambled transmitters with Prewview.

However, you can per transfer by xyz.ini or channels dat into the PRO..

 

@ Tobi7185

 

Leider passen heutzutage nicht mehr alle Hardwareteile zusammen, obwohl jedes einzelne eigentlich in Ordnung ist.

 

Kürzlich hatte ein anderer User eben dieses Poblem mit einem HAMA-LNB, nach dessen Austausch gegen ein Marken-LNB von Invacom klappte es dann auf Anhieb.

[Marsch1]

TransEdit cannot represent scrambled transmitters with Prewview.

However, you can per transfer by xyz.ini or channels dat into the PRO..

 

Engelbert; Goodafternoon,

I don't really understand you , there stands no xyz.ini file on my computer and the channels.dat file in the DVBViewer directory features a lot off numbers/symbols/letters. Must i change manually a range symbols?

How can this solve the real problem. Everything seems to work but there's no descrambled view.

I'm now going to search on the net how to test the alphacrypt or smartcard. The cam menu works fine with even the view off the number of the smartcard

[Engelbert]

TransEdit shows all found transmitters, free and/or scrambled. One can sort these at own discretion.

One then can transfer her directly to DVBViewer (context), when Name.ini store someplace and import in the DVBViewer or when channels.dat store someplace and copy into the DVBViewer dirctory.

 

For the scrambled transmitters it requires a subscription with a smartcard of the provider.

Where do you live?

 

 

Please post some more information:

 

http://www.DVBViewer.com/forum/index.php?showtopic=2210

Edited September 16, 2006 by Engelbert

[Marsch1]

[=For the scrambled transmitters it requires a subscription with a smartcard of the provider.

Where do you live?

Please post some more information:

 

Hereby the information which is also on the 14th Sept postal with the problem.

you ment with XYZ.ini a random name; stupid off the "dutch"men!

I have an subscription wit a smartcard of the provider. Our provider is @Home in Tilburg Netherlands.

The same problem is also with DVBViewer GE. Changing to powerdvd7 doesn't work either.

Enjoy the weekend

 

By

support.zip

Edited September 17, 2006 by Marsch1

[Engelbert]

Unfortunately, your settings are yet like before.

 

You need a good video decoder and audio decoder in DirectX, I had described.

 

And you need a channels.dat with the transmitters which you can receive. free and srambled.

One can make with TransEdit and copy into the DVBViewer this one.

 

Ask your provider in Tilburg for a current transponder list for TransEdit if cable.ini - cableQ256.ini (standard) i dirextory Transponders doesn't suffice - an read rhe TransEdit-Manual careful.

 

Does the original software of TwinHan work with your card, then?

Edited September 16, 2006 by Engelbert

[Marsch1]

Does the original software of TwinHan work with your card, then?

 

from 5 weeks till last week i did make new transponderlists with the latest frequenties and transedit still finds them. my provider uses a variation on the irdato scrambling method.

 

I'll build the new list and make a new channels.dat and try more decoders. But if you get the message: " your not entitled to watch this program" (which is false) How can than another videodecoder help or override this message? My feeling says that these are 2 seperate things

 

DVBViewer worked 6 weeks ago for 1 week. Everything functioned.

THe original software of twinhan never worked for me in a correct way. Only the free channels were viewable. I've read in dutch threads (gather.tweakers) that twinhan software is a problem and they made the switch to DVBViewer or other software.

 

i'll keep you posted

[Engelbert]

Your CAM (which one ?) the special version of Irdeto understands according to the provider and the channels.dat is correct (of TransEdit to DVBViewer), your XP seems to have serious system faults if!

 

Try an new installation of XP on another partition.

 

Unfortunately, I more cannot help.

[Marsch1]

My cam is an Alphacrypt classic 3.08; (blue label)

I've made a new installation /a renewed the partition / formatted / mbr / etc.

installed DVBViewer pro en GE and tried several codecs.

 

There is still no change in the situation. Everything functions except the descrambling.

I still can try the Beta version and install a new XP on a D: partition but i don't know if this gonna help.

 

hereby the supporttool for the current situation; one for DVBViewer Pro and 1 for GE.

 

How can I test if the alphacrypt is corrupt?

support_DVB_GE.zip

support_Pro.zip

Edited September 17, 2006 by Marsch1

[Engelbert]

I don't see any video and audio decoders in your transedit.ini (PRO).

The GE also hasn't typed any decoders in.

 

I don't know test software for CAMs.

Ask your provider for the right version.

Also look

 

http://www, mascom.de

http:// www.irdetoaccess.com

 

Perhaps you can lend a card for testing?

Edited September 17, 2006 by Engelbert