news features screenshots ordering board downloads faq manual
logobottom page

Quick access

membersMembers Section | lost & found | Wiki | Demo

english | deutsch

1. Introduction
2. DVBViewer Installation
3. Fundamental Operating Steps
4. Display Adjustments
5. Recording and Playback
6. The Channel List
7. The Options Window
8. Troubleshooting
9. Tools and Links
10. Small Filter Guide
11. Plugins
12. Legal Notes


For DVB-S you need an antenna link suitable for digital satellite reception. It must be equipped with a digital (universal) LNB as reception unit, otherwise you will only get some channels in the low band, which transmit on formerly analogue transponders. In case of doubt consult a specialised dealer for satellite equipment.
Additionally you need the SkyStar2 card/USB-box from TechniSat (or one compatible with the B2C2-chipset) or a TwinHan PCI card (not USB), which must be installed in or connected to your PC via USB and also be connected to the LNB via a suitable coax cable (i. e.TechniSat Coaxsat 2150 digital).
Terrestrial reception (DVB-T) needs the AirStar2 from TechniSat or a TwinHan card. Of course DVB-T must be available in your region. For optimal DVB experience your PC should be powerful enough to handle the incoming data:
  • A Pentium® III-processor (or higher) starting from 700 MHz. But particularly for editing video files on your PC (conversion, cutting, etc.) the processor can't be fast enough... For HDTV you need a graphic card with IDCT (MPEG hardware acceleration) and a CPU with at least 1 GHz.

    A sufficiently large hard disk. For pure television playback the DVBViewer does not need more than 3 mbytes. For recordings however a large capacity is necessary. A TV broadcast of normal length (without advertisement) can occupy up to 3 gbytes (about 3000 mbytes).

    A graphics card with at least 8 mbytes memory as well as a fairly modern sound card, which is able to process the sampling rate of 48 kHz used with digital satellite reception. In addition to avoid problems, up to date multimedia drivers - which should be available on the manufactures website - are also recommendable. It is advised to use a card with integrated MPEG2 decoder (i. e. Geforce4 MX, Geforce FX, ATI Radeon).

    128 mbytes memory (RAM) or more. The minimum memory capacity depends in individual cases on how much your opera­ting system and other installed software use

  • Windows XP or better as operating system.. The system should also be updated with service packs and updates by Microsoft in order to prevent problems.
    Important Multimedia extensions have (except with Windows XP) only subsequently been added, e.g. DirectX®; the DVBViewer needs at least DirectX version 6.1. Important: An installation of the Windows Mediaplayer® 9/10 (WMP 9/10) and DirectX 9 may lead to problems. Please consider the notes from TechniSat concerning this topic! (

© DVB Page 2005-2022, Developed by A.I.S., Ltd, 2005